Showing 37–48 of 85 results
Electric Screwdriver
Available on backorder
| Weight | 0,000000 kg |
|---|---|
| Dimensions | 0,000000 × 0,000000 × 0,000000 cm |
| Manufacturer |
OnRobot |
| Model Nº |
V 1.5 |
| Size |
308 x 86 x 114 mm |
| Accuracy |
0,04 – 3 Nm |
| Temperature |
5º C – 50º C / 95% |
| Operating Temperature |
0 °C – 50 °C |
| Power supply |
Min 20 V / Typical 24 V / Max 25 V |
| Storage Temperature |
0 °C – 60 °C |
| Torque |
0,15 – 5 Nm |
| Weight |
2,5 kg |
| Current consumption |
Min: 75 mA – Max: 4500 mA |
| Enclosure class |
IP54 |
EMH-RP 036-B
Available on backorder
| Weight | 0,000000 kg |
|---|---|
| Dimensions | 0,000000 × 0,000000 × 0,000000 cm |
| Manufacturer |
Schunk |
| Model Nº |
EMH-RP 036-B |
| Temperature |
5°C – 50°C |
| Enclosure class |
IP52 |
| Weight |
1 kg |
| Length X |
64 mm |
| Height Z |
128 mm |
| Width Y |
64 mm |
| Magnetic surfaces |
6,08 cm² |
| Response Time |
300 ms |
| Strength |
530 N |
| Voltage |
24 V |
| Current |
Max: 3,1 A / Nominal: 0,15 A |
FTN-Omega-191 SI-7200-1400
Available on backorder
| Weight | 50,000000 kg |
|---|---|
| Dimensions | 60,000000 × 60,000000 × 50,000000 cm |
| Manufacturer |
Schunk |
| Model Nº |
FTN-Omega-191 SI-7200-1400 |
| Weight |
9,41 kg |
| Height Z |
64 mm |
| Measuring range Fx, Fy |
± 7200 N |
| Measuring range Fz |
± 18000 N |
| Measuring range Mx, My |
± 1400 Nm |
| Measuring range Mz |
± 1400 Nm |
| Resolution Fx, Fy |
1,5 N |
| Resolution Fz |
3,0 N |
| Resolution Mx, My |
0,21 Nm |
| Resolution Mz |
0,14 Nm |
| Diameter |
190 mm |
| DAQ version |
Yes |
Gecko SP
Available on backorder
| Weight | 1,5 kg |
|---|---|
| Dimensions | 17 × 12 × 8 cm |
| Manufacturer |
OnRobot |
| Model Nº |
Gecko Single Pad (SP) |
| Size |
69 x 71 mm |
| Payload |
1 kg / 3 kg / 5 kg |
| Weight |
0,267 kg / 0,297 kg / 0,318 kg |
| Enclosure class |
IP42 |
| Operating Temperature |
0 °C – 50 °C |
| Storage Temperature |
-30 °C – 150 °C |
| Gripper - Detachment time |
100-1000 |
| Pads - Change-out interval |
~200,000 cycles |
| Pads - Robotic cleaning interval and % recovery |
Variable / 100% |
| Pads - Material |
Proprietary silicone blend |
Gen2 6DOF – STOCK
In stock
| Weight | 25 kg |
|---|---|
| Dimensions | 45 × 65 × 35 cm |
| Manufacturer |
Kinova Robotics |
| Model Nº |
Gen2 6 DoF |
| Interface |
RS-485 |
| Weight |
4,4 kg |
| Voltage |
18 – 29 VDC |
| Payload |
2.6 Kg (mid-range continuous payload capabilities) / 2.2 Kg (full-reach peak/temporary payload capabilities) |
| Materials |
Carbon fiber (links), aluminum (actuators) |
| Joint range after start-up (Software limitation) |
+- 27,7 turns |
| Maximun linear arm speed |
20 cm/s |
| Average power |
25 W (5W in Standby) |
| Water resistance |
IPX2 |
Gen2 7DOF + KG2 gripper – STOCK
In stock
| Weight | 25 kg |
|---|---|
| Dimensions | 45 × 65 × 35 cm |
| Manufacturer |
Kinova Robotics |
| Model Nº |
Gen2 6 DoF |
| Interface |
RS-485 |
| Weight |
4,4 kg |
| Voltage |
18 – 29 VDC |
| Payload |
2.6 Kg (mid-range continuous payload capabilities) / 2.2 Kg (full-reach peak/temporary payload capabilities) |
| Materials |
Carbon fiber (links), aluminum (actuators) |
| Joint range after start-up (Software limitation) |
+- 27,7 turns |
| Maximun linear arm speed |
20 cm/s |
| Average power |
25 W (5W in Standby) |
| Water resistance |
IPX2 |
KR 70 R2100
In stock
HEX Force Sensor
Available on backorder
| Weight | 1,500000 kg |
|---|---|
| Dimensions | 17,000000 × 12,000000 × 8,000000 cm |
| Manufacturer |
OnRobot |
| Model Nº |
HEX-H and HEX-E SENSOR |
| Size |
37,5 x 70 mm |
| Storage Temperature |
0 ºC – 55 °C |
| Weight |
245 g |
| Nominal Capacity (N.C.) |
HEX-E (Fxy: 200 N ; Fz: 200 N -Txy: 10 N·m ; Tz: 6.5 N·m) ,HEX-H (Fxy: 200 N ; Fz: 200 N ; Txy: 20 N·m ; Tz: 13 N·m) |
| Single axis deformation at N.C (typical) |
HEX-E (Fxy: ± 1,7 mm ; Fz: ± 0,3 mm ; Txy: ± 2,5 ° ; Tz: ± 5 °) ,HEX-H (Fxy: ± 0,6 mm ; Fz: ± 0,25 mm ; Txy: ± 2 ° ; Tz: ± 3,5 °) |
| Single axis overload |
HEX-E (Fxy: 500 % ; Fz: 500 % ; Txy: 500 % ; Tz: 500 %) ,HEX-H (Fxy: 500 % ; Fz: 400 % ; Txy: 300 % ; Tz: 300 %) |
| Signal noise2 (typical) |
HEX-E (Fxy: 0,035 N ; Fz: 0,15 N ; Txy: 0,002 N·m ; Tz: 0,001 N·m) ,HEX-H (Fxy: 0,1 N ; Fz: 0,2 N ; Txy: 0,006 N·m ; Tz: 0,002 N·m) |
| Noise-free resolution (typical) |
HEX-E (Fxy: 0,2 N ; Fz: 0,8 N ; Txy: 0,010 N·m ; Tz: 0,002 N·m) ,HEX-H (Fxy: 0,5 N ; Fz: 1 N ; Txy: 0,036 N·m ; Tz: 0,008 N·m) |
ROSbot 3
Available on backorder
| Weight | 15 kg |
|---|---|
| Dimensions | 45 × 38 × 44 cm |
| Model Nº |
ROSbot 3 |
| Manufacturer |
HUSARION |
| Size |
With camera and LiDAR: 200 x 233 x 197 mm ,Without camera and LiDAR: 200 x 233 x 103 mm ,Without camera: 200 x 233 x 141 mm |
| Weight |
With camera and LiDAR: 2,84 kg ,Without camera and LiDAR: 2,45 kg |
| Speed |
1 m/s |
| Payload |
Up to 5 kg (not in continuous work) |
| Battery |
1,5 – 5 h. |
ROSbot XL
Available on backorder
| Weight | 13 kg |
|---|---|
| Dimensions | 45 × 38 × 24 cm |
| Model Nº |
ROSbot XL |
| Manufacturer |
HUSARION |
| Size |
332 x 284 x 131 mm |
| Speed |
0.8 m/s |
| Microphones |
1 |
| Load capacity |
10 kg |
| Controller |
ROS |
| Traction system |
4 x DC motors + quadrature encoders |
| Autonomy |
2-6 H |
| Battery |
11.1V 7800mAh 86Wh |
| Environment |
Indoors |
| Connectivity |
Antenna connector, USB, HDMI, ETHERNET |
| Materials |
Powder-coated aluminum plate, 1.5 mm thick, top plate 3 mm |