Showing 1–12 of 37 results
2FGP20
Available on backorder
| Weight | 8,5 kg |
|---|---|
| Dimensions | 29 × 38 × 20 cm |
| Manufacturer |
OnRobot |
| Size |
400 x 121.6 x 188 mm |
| Weight |
3,7 kg |
| Payload |
20 kg |
| Enclosure class |
IP54 |
| Temperature |
0ºC – 60ºC |
| Drives |
Integrated, electric BLDC |
| Vacuum |
5 % – 80 % Vacuum -0.05 – -0.810 Bar 1.5 – 24 inHg |
| Power supply |
Min 20.4 V / Typical 24 V / Max 28.8 V |
| Gripping time |
0,25 s |
| Releasing time |
0,4 s |
A65 IR
Available on backorder
| Weight | 2,500000 kg |
|---|---|
| Dimensions | 17,000000 × 20,000000 × 10,000000 cm |
| Manufacturer |
FLIR |
| Model Nº |
IR A65 |
| Accuracy |
±5°C (±9°F) or ±5% of reading |
| Temperature |
–25 to +135°C (–13 to 275°F) |
| Field of View |
45° × 37° |
| Scan frecuency |
7,5 Hz |
| IR Resolution |
640 × 512 pixels |
| Thermal sensitivity / NETD |
Below 0,05°C @ +30°C (+86°F) / 50 mK |
| Spatial resolution (IFOV) |
1,31 mrad |
| F number |
1.25 |
| Focus |
Fixed |
| Detector Type |
Focal Plane Array (FPA), Uncooled VOX microbolometer |
| Spectral Range |
7,5–13 μm |
| Detector Pitch |
17 μm |
| Detector time constant |
Typical 12 ms |
| Ethernet |
Control and image |
| Ethernet Type |
Gigabit Ethernet |
| Ethernet, connector type |
RJ45 |
| Ethernet, communication |
GigE Vision ver. 1.2 Client API GenICam compliant |
| Ethernet, standard |
IEEE 802.3 |
| Focal Lenght |
Focal length 13 mm (0,5 in.) |
BH8-282
Available on backorder
| Weight | 20,000000 kg |
|---|---|
| Dimensions | 31,000000 × 52,000000 × 26,000000 cm |
| Manufacturer |
Barrett Technology, Llc |
| Model Nº |
BH8-282 |
| Weight |
0,98 kg |
| Payload |
6 kg |
| Motor encoder resolution |
4096 counts |
| Motor type |
Brushless electric |
| Communication |
CAN / RS-232 / USB Adapters provided |
| Finger speed |
Finger full open to close: 1 s / Full 180 degree: 0,5 s |
| Size |
204 x 90 x 54 mm |
| Communication Protocol |
CAN, RS-232 |
| Interface |
Graphical User Interface (GUI) |
| Voltage |
20 – 80 VDC |
| Gripping time |
0,5 – 1,0 s |
| Nº of fingers |
3 (1 fix, 2 rotable) |
| Hand axis |
8 |
Co-act EGP-C 40-N-N
Available on backorder
| Weight | 0,000000 kg |
|---|---|
| Dimensions | 0,000000 × 0,000000 × 0,000000 cm |
| Manufacturer |
Schunk |
| Model Nº |
Co-act EGP-C |
| Temperature |
5°C – 55°C |
| Weight |
0,62 kg |
| Scan Angle |
30º |
| Repeatability |
0,02 mm |
| Compatible robot |
UR 3/5/10 |
| Robot flange |
Standard flange |
| LED strip light |
Integrated |
| Displayable colors |
Green, yellow, red |
| Integrated sensors |
Yes, inductive in two directions |
| Length X |
93,8 mm |
| Width Y |
90,2 mm |
| Height Z |
123 mm |
| Stroke per jaw |
6 mm |
| Min. gripping force |
35 N |
| Max. gripping force |
140 N |
| Min. force per jaw |
17,5 N |
| Max. stroke per jaw |
70 N |
| Recommended workpiece weight |
0,7 kg |
| Closing time |
0,2 s |
| Opening time |
0,2 s |
| Max. permissible finger length |
50 mm |
| Max. permissible mass per finger |
0,08 kg |
D1-T
Available on backorder
| Weight | 25,000000 kg |
|---|---|
| Dimensions | 45,000000 × 55,000000 × 45,000000 cm |
| Manufacturer |
Unitree |
| Model Nº |
D1-T |
| Interface |
DC5.5-2.1(Power Supply) RJ45（Communication） Type-C（Serial Port Debugging） |
| Weight |
2,37 kg |
| Voltage |
24V 2,5A (MAX 5A) |
| Strength |
60 W |
| Payload |
500 g |
| DOF |
6 Axis + 1 Gripper |
| Reach |
550 mm (Gripper not included) 670 mm (Gripper included) |
| Drives |
Bus servo |
EGK 25-IL-M-B
Available on backorder
| Weight | 0,000000 kg |
|---|---|
| Dimensions | 0,000000 × 0,000000 × 0,000000 cm |
| Manufacturer |
Schunk |
| Model Nº |
EGK 25-IL-M-B |
| Height Z |
78 mm |
| Length X |
83 mm |
| Width Y |
62 mm |
| Weight |
0,62 kg |
| Temperature |
5°C – 55°C |
| Max. gripping force |
50 N |
| Min. gripping force |
20 N |
| Stroke per jaw |
26,5 mm |
| Voltage |
24 V |
| Enclosure class |
Electronic system: IP67 Guides/Jaws: IP20 |
| Max. permissible finger length |
70 mm |
| Max. permissible mass per finger |
0,13 kg |
| Closing time |
0,37 s |
| Opening time |
0,37 s |
EGP
Available on backorder
| Weight | 1,500000 kg |
|---|---|
| Dimensions | 17,000000 × 12,000000 × 8,000000 cm |
| Manufacturer |
Schunk |
| Model Nº |
EGP |
| Weight |
Consult according to specific model |
| Temperature |
5°C – 55°C |
| Enclosure class |
IP30 |
| Current |
0,14 A |
| Voltage |
24 V |
| Max. stroke per jaw |
3 – 10 mm (depending on the model) |
| Min. gripping force |
40 – 150 N (depending on the model) |
| Max. gripping force |
40 – 150 N (depending on the model) |
| Recommended workpiece weight |
Up to 1,3 kg (depending on the model) |
| Max. permissible finger length |
Up to 50 mm or more (depending on the model) |
| Max. permissible mass per finger |
Consult according to specific model |
| Closing time |
0,2 s |
| Opening time |
0,2 s |
| Repeatability |
0,02 mm |
| Integrated sensors |
Position sensors |
| Size |
Consult according to specific model |
EGS 25-N-N-B
Available on backorder
| Weight | 0,000000 kg |
|---|---|
| Dimensions | 0,000000 × 0,000000 × 0,000000 cm |
| Manufacturer |
Schunk |
| Model Nº |
EGS 25-N-N-B |
| Ambient illuminance |
5º C – 55ªC |
| Weight |
0,45 kg |
| Voltage |
24 V |
| Current |
Max: 1,2 A – Nominal: 0,8 A |
| Length X |
69,8 mm |
| Width Y |
45 mm |
| Height Z |
88,8 mm |
| Stroke per jaw |
3 mm |
| Min. gripping force |
15 N |
| Max. gripping force |
30 N |
| Recommended workpiece weight |
0,15 kg |
| Max. permissible finger length |
32 mm |
| Max. permissible mass per finger |
0,02 kg |
| Opening time |
0,05 s |
| Closing time |
0,05 s |
EGU 50-PN-N-B
Available on backorder
| Weight | 0,000000 kg |
|---|---|
| Dimensions | 0,000000 × 0,000000 × 0,000000 cm |
| Manufacturer |
Schunk |
| Model Nº |
EGU 50-PN-N-B |
| Temperature |
5°C – 55°C |
| Weight |
1,44 kg |
| Length X |
122 mm |
| Height Z |
88 mm |
| Width Y |
72 mm |
| Enclosure class |
Electronics: IP67 Guide/base jaws: IP40 |
| Repeatability |
Repeat accuracy (gripping): 0.02 mm Repeat accuracy (positioning, unidirectional): 0.05 mm Repeat accuracy (positioning, bi-directional): 0.15 mm |
| Interface |
PROFINET |
| Stroke per jaw |
51 mm |
| Min. gripping force |
150 N |
| Max. gripping force |
300 N |
| Max. permissible finger length |
80 mm |
| Recommended workpiece weight |
0,4 kg |
| Opening time |
0,8 s |
| Closing time |
0.8 s |