Laser sensor. 

More details

New product

Optional components

969,00 €

Taxes are not included

- +

More info

This was 60% smaller than PB9 about cubic volume. Scanning angle(Detection area) is increased to 180° and detectable dead zone is getting smaller.
Operation principle is that semicircular field is scanned by LED(lambda = 880nm) and the coordinates is calculated by measuring distance to object and its step angle and then it detects obstacle in setting area.
Detection area can be set by PC(RS-232C). Detection distance with 3 steps output for each area can be set.
Changeover for Max. 15 kinds of detection area set by PC can be made by outer bit input.

Data sheet
Ambient temperature / humidity-10 to +50 degrees C, 85%RH or less(Not dew-drop and frozen)
Power input 24VDC(Allowable range 18 to 30VDC including ripple)
Power Comsution250mA or less(100mA or less when emission stops) Except for I/O terminal current and rush current(500mA)
Hysteresis10% or less of detection distance
Output response time180 msec or less(Scanning speed 1 rev./100 msec) 280 msec or less when using interference misjudge avoidance mode(Except for 100 msec, area changeover time)

23 other products in the same category:

No products

Login Shipping
Login Total

Prices are tax excluded

Check out